When choosing an e-bike, we face a key decision – mid-drive or hub motor? There is a common belief in the Czech Republic that mid-drive motors from Bosch or Yamaha are always the best choice. However, the reality is more complex. Each type of motor has its place and ideal use case.
The e-bike motor fundamentally affects riding characteristics, range, and price. Mid-drive motors dominate the premium category and offer top-tier performance on hills thanks to the use of the bike’s gears. Hub motors remain a popular choice for urban cycling due to their lower price and easier maintenance. According to experts, it depends on where and how you ride – there is no universally “best” motor.
Mid-drive motor – balanced performance for demanding terrain

The mid-drive motor is installed in the center of the drivetrain, directly between the pedals. The torque is transferred through the chain and gears, just like regular pedaling. This solution is used by all major manufacturers such as Bosch, Yamaha, Shimano, or Brose.
The biggest advantage of a mid-drive system is the efficient use of the gear system. When you shift to a lower gear on a steep hill, both the motor and your legs work at optimal RPMs. Much like in a car – you don’t try to drive up a hill in fifth gear. This synergy results in up to a third more range compared to hub motors with the same battery capacity.
Modern mid-drive motors use three types of sensors. They measure cadence (pedal RPM), speed, and, most importantly, pressure on the pedals via a torque sensor. For example, Bosch motors take measurements a thousand times per second. The result is smooth assistance that precisely replicates your pedaling force.
The weight of both the motor and the battery is concentrated low and near the center of the bike. The center of gravity remains optimal, which you will appreciate when cornering or riding off-road. The e-bike behaves like a regular bike, just with significantly stronger legs.
Current flagships offer impressive parameters. The Bosch Performance Line CX Gen5 provides 85 Nm of torque and supports batteries up to 750 Wh. The Yamaha PW-X3 offers the same performance at a lower weight – just 2.75 kg. Shimano EP8 has reduced pedaling resistance when the motor is off by 36% compared to the previous generation.
In the Czech Republic, prices for quality mid-drive e-bikes start from 40,000 CZK and up. However, the higher investment is returned in the form of longer motor life, better mechanical equipment, and significantly lower energy consumption.
Hub motor – a practical choice for the city

The hub motor is built directly into the hub of the rear (sometimes front) wheel. The motor spins the wheel directly, independent of the chain and gears. This solution is used primarily by the world’s largest manufacturer, Bafang, and a number of other Chinese and European brands.
A motor in the rear wheel offers ideal torque transmission to the surface. Off-road, there is practically no risk of slipping because the rider’s weight presses the rear wheel to the ground. Instant acceleration works reliably – the motor starts helping from the first pedal stroke.
A great advantage is simplicity. A hub motor has fewer moving parts than a mid-drive system. Service is straightforward, and in case of a breakdown, it is usually cheaper. The motor features a freewheel, so it provides virtually no resistance when riding without assistance.
Most hub systems work with a cadence sensor, which only measures the rotation speed of the pedals. More expensive variants may have a torque sensor located in the crankset. According to experts, only about 5% of hub motors on the market use this more luxurious system.
The disadvantage remains uneven balance, especially with a battery mounted on the rear rack. The bike’s center of gravity shifts to the rear, which is noticeable during handling or in sharp corners. The motor also cannot use the gears, which leads to higher energy consumption – up to 35% more compared to mid-drive motors.
On steep hills, the motor works at unfavorable RPMs and can be noisier. When changing a rear tire, a special wrench is required, and the whole procedure takes longer than on a standard bicycle.
Prices for quality hub-motor e-bikes start around 30,000 CZK. For regular city commuting or riding on gentle bike paths, they represent a reasonable choice with a good price-to-performance ratio.
How to choose based on your riding style
The key is not which motor is objectively better, but which one fits your riding style.
Choose a mid-drive motor for sporty riding, hills, and longer tours. Electric mountain bikes almost exclusively use mid-drive motors – the ability to shift gears in challenging terrain is irreplaceable. For daily commuting to work through a hilly city like Prague, you will appreciate the efficiency and smoothness. The higher purchase price is worth it with more regular use.
A hub motor is a good choice for relaxed city riding or flat terrain. If you only want electric assistance for gentle hills or to combat headwinds, a hub motor with a quality battery will suffice. Seniors often appreciate the instant onset of assistance without the need to pedal hard.
For mixed city/off-road riding, it depends on the ratio. If you only occasionally take a trip out of the city, a mid-drive motor is a more universal solution. If you spend 90% of your time on flat ground and only occasionally head into gentle hills, a lower-priced hub motor may be enough.
Quality matters more than the type
It is a mistake to automatically consider every mid-drive motor better than a hub motor. There are many low-quality mid-drive motors on the market from unknown manufacturers. Conversely, top-tier hub systems from Bafang or Go SwissDrive are technologically sophisticated and reliable.
There are also huge differences between mid-drive motors. A Bosch Performance Line CX offers a different level of refinement than a basic Bafang Max Drive. According to tests, the Bosch had the fastest time on a steep hill (13.9s), the Yamaha was a second slower (14.5s), and the Shimano EP8 was practically the same (14.8s). The differences were, in practice, imperceptible.
It is also important to verify what type of sensor the motor uses. Cheap mid-drive motors with only cadence sensors won’t provide a significantly better experience than a quality hub system. A torque sensor makes a fundamental difference in the smoothness of the ride.
The Czech brand Crussis uses Japanese Panasonic motors in their e-bikes, which offer top quality and long service life. Here too, parameters like torque (85 Nm on top models) are more important than just the label “mid-drive motor”.
Before you decide, try both types in real-world conditions. Many stores offer test rides, which will give you a better idea than any table of parameters.
Sources: Royal Dutch Bikes Gazelle, Upway, Mokwheel, Bosch eBike Systems, Himiway, Polygon Bikes, Electric Bike, Ekolo.cz







