After sixteen years during which Bosch stubbornly defended exclusively mid-drive motors, a turning point has arrived. This morning in Hamburg, the German giant introduced its first-ever hub motor for e-bikes – Hub Line – and immediately showcased it on four specific bikes. It targets a segment previously dominated by Mahle: lightweight, cleanly designed city e-bikes that do not look like e-bikes at first glance.
A historic moment, not just another motor
To be clear about how fundamental this shift is: Bosch entered the e-bike market in 2010 – right away with a mid-drive motor. At a time when the market was dominated by hub motors, it was one of the few manufacturers to advocate for the mid-drive as a better solution. It defended this position for sixteen long years. In its materials, it repeatedly emphasized the advantages of the mid-drive motor: better weight distribution, higher efficiency on hills, more natural riding, and tighter integration with gears.
And now, Bosch itself is entering the camp it argued against for years. Hub Line (internal designation BDU306Y) is the first hub motor in the brand’s history. The reason is simple – demand. In the segment of elegant city bikes, customers increasingly want a bike that looks like an ordinary bike, without a “bulky” motor in the middle of the frame. And mid-drives simply cannot do that as well as a compact motor hidden in the rear hub.
Claus Fleischer, CEO of Bosch eBike Systems, speaks directly of a “new era of city e-bikes” – lightweight, agile, and design-pure.
Technical specifications of the Hub Line (BDU306Y)
| Parameter | Value | Note |
|---|---|---|
| Type | Rear hub motor | First from Bosch |
| Torque | 45 Nm | Modest, tuned for the city |
| Power | 250 W continuous / up to 400 W peak | Peak at ~70 rpm |
| Motor weight | ~2.3 kg | Motor only |
| Diameter | ~100 mm | Very compact |
| Max. assisted speed | 25 km/h | Motor disconnects completely above this (no resistance) |
| Sensors | Cadence + position | No torque sensor |
| System weight | Motor + PowerTube 360 ≈ 4.4 kg | Extremely lightweight solution |
From the numbers, it is immediately clear where Bosch is aiming. The 45 Nm torque is modest by the standards of Bosch mid-drive motors (the Performance Line CX handles significantly more), but for city riding on flat ground and slight inclines, it is perfectly sufficient – and matches the competition in the form of the Mahle X35. The motor, with a diameter of roughly 100 mm and a weight of about 2.3 kg, almost disappears into the rear hub.
The stumbling block and key to simplicity: missing torque sensor
The most important technical feature of the Hub Line is also its biggest compromise. The motor lacks a torque sensor; it works only with cadence and position. The system therefore takes into account speed, crank revolutions, and route inclination, but it does not include the actual force the rider is applying into its calculation.
This has two practical consequences. First, advanced modes dependent on reading pedaling force—eMTB, Race, Cargo, and similar—are gone. There are a maximum of four active modes (plus Off): typically Auto, Eco, Tour, and Turbo. Bosch eShift electronic shifting is supported on selected Shimano Di2 and TRP models.
Second, this changes the riding character – and more on that in a moment in the impressions from Hamburg.
New PowerTube 360 battery and complete ecosystem
The Hub Line does not arrive alone. Bosch has built a new set of components around it designed to make the resulting bike look as clean as possible:

PowerTube 360 is the thinnest battery Bosch has ever made – with a diameter of only 68 mm, it fits into a down tube with a width close to a standard non-electric bike. It weighs 2.1 kg, offers a capacity of 360 Wh, and according to Bosch, has a range of around 80 km (up to ~89 km in energy-saving Eco mode). The bike manufacturer can choose whether to integrate it permanently or make it removable. A PowerMore 250 range extender and DualBattery solution can also be added.
The new-generation ConnectModule combines GPS, mobile network, and motion sensors, now also including Bluetooth Low Energy. Thanks to this, it manages more accurate localization even in courtyards or basements, reportedly down to the level of a few meters. Full features (alarm, motion alerts) are tied to the Flow+ subscription.


The LED Controller is about 65% smaller than the previous LED Remote; Bosch tuned the ergonomics in collaboration with SQLab. It offers five buttons within thumb reach, automatic brightness control, and an integrated USB-C port with 10 W charging for a phone.
Intuvia 200 is a simple, fixed 2.4″ grayscale high-contrast display. It shows speed, mode, battery status, time, gear, and effort – and because it is non-removable, it is one less thing you have to take with you when parking.

By the way: On the same occasion, Bosch also showed a modernized Active Line Plus mid-drive (torque increased from 50 to 60 Nm, the motor is 17% smaller and half a kilo lighter) and a new PowerTube 720 battery with a range of up to 185 km and a digital lock. Thus, the Hub Line is not replacing the mid-drive segment – Bosch is developing both in parallel.
First riding impressions from Hamburg
At the premiere, journalists were able to test the motor on three prototypes – from the brands Canyon, Gazelle, and Moustache. According to initial impressions from the German website UrbanBike.News, the Hub Line performed well as a solid entry into a new category in a city environment.
The Auto mode proved to be the clear favorite. On flat terrain, it assists pleasantly and unobtrusively; the bike accelerates briskly without having a tendency to “run away” on its own. In climbs, the support noticeably kicks in – so much so that it almost approaches Turbo mode. It is precisely this adaptability that makes Auto the most comfortable choice in practice.
In contrast, Turbo revealed weaknesses. On flat ground, it reacts very energetically, and with minimal effort, it pushes strongly forward, which feels a bit unnatural on light bikes. This is where the absence of a torque sensor shows the most: you only need to lightly spin the crank without real force, and the motor helps anyway. When starting up a steep hill, the support only kicks in after about a quarter-turn of the crank – those who want to bypass this can use the walk assist as a launch aid.
It was interesting how strongly the character of the motor influences the bike itself. In a light singlespeed, the Hub Line felt agile and almost stronger than the paper numbers suggest; in a heavier bike with the same drive, it felt noticeably tamer. A third test bike evened it out with a derailleur. The new Universal Transmission two-speed gearbox, which Bosch also showed in Hamburg, also offers an interesting alternative to a singlespeed.



Operation is – typically for a hub motor – pleasantly quiet; while riding, you only hear a light, constant hum that quickly fades into the noise of normal city traffic. The new battery also received praise: the removable PowerTube 360 is, according to impressions, noticeably easier to insert and remove than the similarly compact PowerTube 400.
Bikes that will feature the Hub Line
For the premiere, Bosch (and partner VELLO) announced four specific models:
| Model | Type | Price (from) | Weight | Availability |
|---|---|---|---|---|
| Gazelle Curb (C1 / T9) | City urban | €2,399 | ~21.4–23.5 kg | End of 2026 |
| Canyon Roadlite:ON CF | Lightweight urban/sport | ~€2,999 | ~14 kg (carbon) | Orderable now |
| Moustache Lundi 27 | City urban | €2,399 | — | 2027 |
| VELLO VIA+ (Tour / Urban) | Folding | €2,990 (intro) | 16.5–16.9 kg | Pre-orders, Eurobike 2026 |
The Gazelle Curb is the most detailed bike described so far. It will come in two versions – the C1 with a Gates belt in a single-speed design, and the T9 with a chain and nine Shimano gears. The classic display is missing here; a smartphone in a mount (SP Connect / Quad Lock) plays the main role. Hidden cables, integrated Supernova lights, hydraulic disc brakes, and a frame lock round off the minimalist look, which targets younger city riders.


The Canyon Roadlite:ON CF is the lightest of the four – a carbon frame brings the weight down to roughly 14 kg, and the geometry is sportier. It is a single-speed e-city bike that Canyon has categorized among its flagship “clean” models.
The VELLO VIA+ is notable for being the first folding e-bike with this motor. It features a patented stable frame, folding in seconds, a tilt sensor for adaptive support, and Supernova lights. It will be shown in person at Eurobike at the end of June.

Battle with Mahle and how much it costs
Hub motors are nothing new – Mahle (X35/X20), Bafang, some Brose models, and a range of Chinese systems have offered them for years. Therefore, Bosch does not bring a revolution in the parameters of the motor itself. What it does bring is a full-fledged premium ecosystem around it: integration with the eBike Flow app with navigation, personalization, and OTA updates, a new ConnectModule with BLE, eShift, a digital battery lock – and of course, a massive service network across Europe. This is exactly what was either missing or very limited in most previous hub motors.
In terms of price, Hub Line bikes are kept very reasonable. Models at €2,399 – €2,999 are comparable or cheaper than similar Bosch mid-drive bikes (typically €2,800 – €4,500 and more, often 3–6 kg heavier), yet they offer significantly lower weight and a cleaner design. Compared to bikes with Mahle X35 (usually €2,000 – €3,500), while not the cheapest, they provide the complete Bosch Smart System and service background, which is often not a given for Mahle models.
Who it is for – and what remains to be seen
The Hub Line makes sense primarily for someone who wants an elegant city bike that does not look like an e-bike, appreciates the Bosch ecosystem (app, updates, security), and is looking for a lightweight, clean solution with brand certainty and good service. For riding in very hilly terrain, carrying cargo, or achieving maximum “naturalness” and sensitivity of support, mid-drive motors like the Active Line Plus or Performance Line remain better choices.
Three open questions remain, which will only be answered by long-term tests:
- How will 45 Nm and the lack of a torque sensor perform in real city climbs and with cargo?
- What will the actual range and efficiency be in practice?
- How will long-term reliability prove? Bosch has huge experience with mid-drives, but zero with hub motors so far – and that will only become clear in two to three years of real-world use.
Availability
The Hub Line is a matter for the 2027 season; the first bikes will start appearing at the end of 2026. Real long-term tests do not exist yet – the announcement is literally fresh. But initial impressions from Hamburg are positive, and other brands will likely follow.
Sources: Bosch eBike Systems press release (June 18, 2026), official Bosch product pages, BikeRadar, CyclingElectric, UrbanBike.News, ebike24.com, and press materials from Gazelle, Canyon, Moustache, and VELLO. Specifications are based on manufacturer data and will be refined after the first independent tests.

