A new White Paper from the European Cycling Industries (ECI) describes how illegal e-bikes are entering the EU market. However, it does not mention what the import from China has effectively pushed into the gray zone.
Editor’s note:
This text is primarily intended for professionals in the e-bike industry, but it may make it a little clearer for ordinary e-bike users why we have so many current problems with the legality, performance, speed, and other attributes of e-bikes. I also recommend reading the article “E-bikes have no type-approval and chips are not “illegal” on the roads. What the “law” really says“.
What ECI Claims
European Cycling Industries (ECI) – the successor organization formed last December by the merger of CONEBI and Cycling Industries Europe – is the latest metamorphosis of this association, which describes itself as the “voice of the cycling business” in Europe. Therefore, it is not the voice of e-bike users, but represent the goals of manufacturers and technology suppliers.
In May 2026, ECI published a document titled Safeguarding the European E-Bike Market. It describes how e-bikes that do not meet technical standards or circumvent customs regulations are entering the European market.
According to the White Paper, over the past decade, e-bike production in the EU and UK has increased by 392%, and sales by 542%. At the same time, the proportion of e-bikes that do not comply with the limits for so-called EPACs – i.e., 250 W continuous power, 25 km/h, and assistance only while pedaling – is also growing.
ECI divides the problem into two levels:
- Technical – the bike exceeds power or speed limits, has inadequate brakes, or electromagnetic compatibility,
- Commercial – the importer bypasses customs duties or anti-dumping measures, for example, by falsely declaring the origin of goods, by “screwdriver” assembly outside the EU, or by undervaluing invoices.
The document further categorizes infringements into three phases of the bike’s life cycle – upstream (manufacturing), midstream (transport and sales), and downstream (post-sale modifications, tuning, conversions). Finally, ECI proposes a series of steps: awareness campaigns, cooperation with customs and police, whitelists of verified sellers, and pressure on delivery platforms.
EPAC vs. S-Pedelec: Where the Bicycle Ends and the Moped Begins
| Parameter | EPAC | S-Pedelec |
|---|---|---|
| Max. continuous power | 250 W | 4000 W |
| Assistance limit | 25 km/h | 45 km/h |
| Throttle | no (max 6 km/h) | yes, from 0 km/h |
| Driving license | no | AM (or B) |
| License plate and insurance | no | mandatory |
According to ECI, bikes that exceed this limit but are sold and used as regular e-bikes are at the core of the problem – they lack type-approval, riders operate them without registration and insurance, and in the event of an accident, there is a higher risk of injury due to higher power and weaker brakes.
The fact that this argument is misleading can be verified by a simple comparison of models that manufacturers offer in parallel as classic EPACs and as S-Pedelecs with L1e-B homologation, i.e., approved according to Regulation (EU) No 168/2018. Apart from mandatory accessories – mirrors, license plate holder, and more powerful lights – both versions are equipped with the same components, on the same frame, with the same motor. The difference is purely software: the power and speed limits are set by the control unit.
Moreover, the advent of powerful drives, such as the Chinese Avinox, blurs the line. Although it has a declared “peak” power of 250 W, in reality, it is a motor with a continuous power of up to 1500 W – six times the limit specified by the EPAC standard. Modern tuning chips with mobile apps also allow setting the maximum speed anywhere between 25 and 45 km/h.
Where Illegal Imports Came From – 2019 Tariffs
The White Paper is silent on this. The wave of non-transparent imports that ECI describes has a specific birth date: January 18, 2019, when the EU imposed anti-dumping and countervailing duties of 18.8% to 79.3% on e-bikes from China.
The proceedings were initiated in November 2017 with a complaint from the EBMA (European Bicycle Manufacturers Association) – a lobbying association of European bicycle and e-bike manufacturers. According to EBMA, Chinese manufacturers benefited from unfair state subsidies: preferential financing, the ability to purchase motors and batteries from companies like Bafang below market price, tax relief, and cheap land. After a thirteen-month investigation, the European Commission accepted EBMA’s arguments.
However, not everyone agreed with the conclusions. Chinese motor manufacturer Bafang rejected the accusations in its response as unfounded – according to them, EBMA presented “accusations without any evidence” of state subsidies. The Belgian e-bike importers’ association LEVA-EU called the tariffs “unsubstantiated, protectionist, unfair, and absurd.”
The Czech Voice in the Negotiations That No One Heard
Jakub Ditrich from ekolo.cz, who has been involved in OEM e-bike production in China since 2007, approached DG Trade in November 2024 with his own comments on the extension of tariffs (the so-called expiry review, case R811). The submission is part of the public case file. Based on questionnaires he sent to Chinese and Taiwanese manufacturers with whom he has long-term cooperation, he claims that the specific advantages on which EBMA based its complaint – such as zero electricity prices for factories, zero export duties, subsidy programs – were not actually applicable to any of the contacted companies. According to Ditrich, this was not an inaccuracy, but a deliberate manipulation of verifiable facts by EBMA, which could have been verified by a direct inquiry to individual companies.
Why didn’t this happen back in 2019? The answer is quite prosaic. The costs of tariffs are spread among hundreds of thousands of European consumers and hundreds of importers, while their benefits are concentrated in the hands of a few dozen manufacturers associated with EBMA. The plaintiff had a strong motivation to invest in legal and lobbying apparatus. On the other hand, there was a lack of a comparably organized force to systematically verify the facts – and the EU, unlike its British counterpart, does not have a mandatory “economic interest test” that would compel the regulator to do so.
Such a test was conducted in May 2024 by the British Trade Remedies Authority (TRA) – an independent regulator that takes over and reviews tariffs post-Brexit independently. The TRA recommended revoking the tariffs on non-folding e-bikes from China. The decisive factor was the cost-benefit ratio: the TRA found that the tariffs harmed British consumers and importers more than they protected domestic manufacturers (primarily the Brompton brand). Therefore, from February 7, 2025, tariffs on the vast majority of e-bikes from China no longer apply in the UK.
Who Is Actually Behind the Tariffs?
The EBMA association is located at Avenue Marnix 17, 1000 Brussels. This is exactly the same address where CONEBI is located – the organization that merged with Cycling Industries Europe last December to form ECI, the author of the current White Paper.
Moreno Fioravanti, former president of EBMA, who suddenly passed away two years ago at the age of 62, had been active in the association since 2003. He was also behind the introduction of earlier anti-dumping duties on conventional bicycles from China – these have been in place since 1993, and EBMA pushed for their retention at 48.5% during their 2013 review.
The Effect of Tariffs: Imports Didn’t Disappear, They Just Went Underground
Tariffs of tens of percent did not cut off the European market from Chinese e-bikes; they only increased the incentive to disguise imports. This is precisely what ECI’s White Paper describes over dozens of pages: transshipment through third countries, “screwdriver” assembly, undervaluation of invoices, and artificial disassembly of bikes into parts to benefit from lower tariffs on spare parts.
However, it is relatively amusing to observe that the effect is the exact opposite of what the companies associated with EBMA expected. Instead of retreating, Chinese capital began to acquire European production capacities. In addition to dozens of assembly plants for e-bikes established in Poland, Romania, and the Czech Republic, the investment fund Dutech Holdings, owned by Chinese investor Johnny Liu, acquired the bankrupt German manufacturers Prophete and Cycle Union in 2023. According to recent reports, it has now acquired the Dutch Accell Group – until recently the largest European e-bike manufacturer – which owns the brands Haibike, Lapierre, Batavus, Sparta, Koga, and Raleigh. The transaction now awaits approval from the German antitrust authority.
What ECI proposes next
The ECI Product Compliance Task Force proposes five areas of action:
- Communication and Awareness – a unified media campaign with national associations, explaining the “legal reclassification” of a modified bike as a moped.
- Cooperation with Authorities – technical support for customs and police, road dynamometers (tested in Nottinghamshire, the Netherlands, Belgium, and Germany).
- Cooperation with Retailers – mandatory conformity certificates for e-shops, whitelists of verified sellers (example: the British E-Bike Positive initiative).
- Negotiations with Delivery Platforms – pressure to comply with EN 15194 for fleets, addressing the “per hour delivery” reward system.
- Cooperation with Testing Laboratories – data collection on the most problematic models.
Instead of pressure to adapt legislation to current technologies and user needs, there will likely be another round of checks – on the roads, at retailers, with the aim of mandatorily slowing down bikes and limiting their power.
Regardless of the outcome of the media campaign, whitelisting, or road dynamometers, the White Paper does not forget one thing – to defend the status quo that its authors themselves have helped build for years.
Whether this is good for the European market and its consumers is something everyone who considers the specific arguments must answer for themselves.
Our humble recommendations for ECI and the E-Bike Industry:
- Stop playing the game of “nominal motor power 250W” and declare its real power.
- Actively cooperate in the creation of universal standards for e-bikes (EPAC EN 15194). The new EPAC for 2027 is being developed under the supervision of only a few corporations (Decathlon, Sram, Bosch, Trek, Accell group), which reflect their particular interests.
- Uniform rules for e-components that are clear and understandable to everyone, including customers. Simple rules for storing and selling batteries, including their repair. A universal connector and communication for charging e-bike batteries.
- Commission a practically verified study on the impact of e-bike motor assistance speed on riding safety. Considering the rider’s power output while pedaling, and considering the 30 km/h zones in cities. Changing the 40-year-old speed limit (which was never intended for e-bikes) restricts the development of cycling transport and also hinders surrounding traffic. Disabling the motor at 25 km/h is very dangerous for riders. “Chip tuning” (tampering) will disappear immediately.
- Instead of banning e-bike imports (which leads to circumvention and generates illegal products), establish clear rules that the majority of manufacturers will understand and be able to comply with.
Sources: Safeguarding the European E-Bike Market (ECI, May 2026), EU imposes stiff anti-dumping duties on Chinese e-bikes (Bicycle Retailer and Industry News, January 18, 2019), China counters EBMA anti-dumping evidence with own investigation (Cycling Industry News, November 13, 2017), ekolo.cz submission in case R811 (DG Trade, November 2024), Tariffs on non-folding e-bikes from China revoked (GOV.UK, February 6, 2025), EBMA – Contact, EBMA mourns the loss of President Moreno Fioravanti (Bike Europe, February 2024)

